Face Mill
Face Mill
What is the best "cheap" club or group has ever had?
I recently (unfortunately) got rid of Tom Adams Watson Gunmetal 60 *. I thought I already paid $ 30 for the new that it would probably be better with a wedge "better." I'm looking for a new or slightly used once. It was the best wedge I've used for Nice chips and high tones, without being a club face milled. I guess this must have happened to others, so perhaps people could benefit from some suggestions for lower cost. If it helps, used http://www.globalgolf.com/ Ram Tom Watson 58 *
I had a RAM Tom Watson 58 * wedge in college who was a magic wand - whenever I'm faced with a difficult shot from a tight pin I remember what I was an idiot for not buying so many of them as I could while they were doing (mine got so used to carrying out the grooves and completely unique - I could not stop practicing all the time because the fun was so successful - balloons high, low rotating photos, all kinds of shooting sand - I do not know if my capacity has diminished or that the wedge has been good, but I tried my best complete game - I was not afraid of any pin because he was so confident going up and down with this thing, even the gnarliest places). Sure it will not help (still looking for the club on eBay), but your question reminded me (again) that I was an idiot to get rid of this club and felt compelled to share.
|
|
Valenite V555-A-09-0400-K07R - 4 Inch Face Mill - PD** 09** Insert Style Tool $149.99 |
|
|
Seco R220.17-02.00 - 2 Inch Face Mill $39.99 |
|
|
Ingersoll SP6H-03R02 3 Inch Index High Feed Face Mill Toolholder $99.99 |
|
|
Kennametal Kenloc KLSR-3-CN4- 3 Inch Face Mill Toolholder (EDP# 3788625) $49.99 |
|
|
Valenite V590A130400K10R - 4 Inch Face Mill Toolholder (EDP# 62545) $79.99 |
|
|
2 - Valenite V490A150200G04R - 2 Inch 90 Degree Face Mill Toolholders $99.99 |
|
|
Continental Tool Works Machinist Blade Face Mill Ad '54 $4.95 |
|
|
KENNAMETAL 3" INDEXABLE FACEMILL w/ R8 SHANK $82.00 |
|
|
WALTER 3" INDEXABLE FACEMILL w/ R8 SHANK $103.51 |
|
|
SANDVIK 6" INDEXABLE FACEMILL w/ 1-1/2" ARBOR $36.00 |
|
|
SJ6H-06R01 SMAX 6.00 INCH FACE MILL INGERSOLL $299.00 |
|
|
6"Carbide Insert Face Mill Milling Cutter 431-221142R16 $110.00 |
|
|
VALENITE V45CT-S125-22 SHELL/FACE MILL ADAPTER $49.00 |
|
|
Lyndex BT40 Sandvik 100mm 6 Flute Face Mill $200.00 |
|
|
HERTEL 6388CD6 4"x1-1/2 Ind. Face Mill NEW!!! (GB24) $224.95 |
|
|
NIAGARA 2" END/FACE MILL HHS A285 $79.99 |
|
|
1" ARBOR SHELL END / FACE MILL HOLDER R8 BRIDGEPORT $24.50 |
|
|
RTW RF45400S150SE443 45 DEGREE INDEXABLE FACEMILL $242.99 |
|
|
KENNAMETAL 32MM END/FACE MILL CARBIDE INSERTS Z904 $49.99 |
|
|
USST BT40 TAPER 1-1/4" ARBOR FACE MILL HOLDER $39.99 |
|
|
BRINEY SHELL MILL (FACE MILL) HOLDER, BT 50 TAPER, BT50SM-200-350 NEW IN BOX $20.00 |
|
|
FACEMILL, 3" INDEXABLE CARBIDE INSERTS, POSITIVE, 1.0" HOLE $50.00 |
|
|
FACE MILL COUNTER BORE VALENITE CARBIDE INSERTS R386S $89.99 |
|
|
Iscar HFHL 25.4-100-4T25 1.0X1.0 Face Mill New in Package!!! $45.00 |
|
|
Iscar 3M F90AX D125-40-20 Mill 2000 Face Mill. New in Package!!! $212.50 |
|
|
Carboloy 45 Degree Face Mill 10 Insert 6.75" OD $125.00 |
|
|
Ingersoll Side Milling Cutter/Face Mill 90 Degree 12 Insert 5.25" OD Right Hand $100.00 |
|
|
Mill Hill Father Christmas Ornament Charmed Santa Face Beads Beaded Kit NIP $10.00 |
|
|
FACEMILL 3" INDEXABLE (6 INSERTS) WITH R-8 SHANK $45.00 |
|
|
Lot of 16 Lovejoy Anvil 1410RA & 1410LA - For Face Mill $75.00 |
|
|
DSRS GROOVED DOUBLE FACE LOGGING SAW SET MILL BLACK SMITH WOOD ANVIL HAND TOOL $75.00 |
|
|
RTW RF45197S075SE53 HI-SHR 45 DEG INDEXABLE FACEMILL $217.07 |
|
|
20 Lovejoy ATC Anvil 1569RA & 1569LA - For Face Mill $99.00 |
|
|
NEW INGERSOLL 6X4S04R51 6M2S-04R02 4" 20° FACE MILL $550.00 |
|
|
DEVLIEG 3/4" ARBOR FACE MILL HOLDER #40 NMTB FLASH CHANGE $39.99 |
|
|
DEVLIEG 1" ARBOR FACE MILL HOLDER #40 NMTB FLASH CHANGE $39.99 |
|
|
Valenite VRT HD608 7" Indexable Face Mill w/ Extra Inserts NICE! $199.99 |
|
|
NEW NMTB 40 TAPER 1 1/4" FACE MILL ARBOR milling tool holder ETM USA $99.00 |
|
|
SANDVIK CAPTO C4 R390 044C4 18MO80 241462 FACE MILL MACHINE SHOP $149.99 |
|
|
CAPTO C3 RA210 038C3 09M 29706 FACE MILL MACHINE SHOP $124.99 |
|
|
SANDVIK CAPTO C3 5513 020 39 FACE MILL MACHINE SHOP $149.99 |
|
|
FACE PLATE FOR MAXIMAT 7 LATHE / MILL COMBO $20.00 |
|
|
Lot of 20 Lovejoy Anvil LTC 1569R 1569L -For Face Mill $75.00 |
|
|
Ingersoll 2-1/2''Form Master Button Face Mill $300.00 |
|
|
Ingersoll 3'' Form Master Button Face Mill $300.00 |
|
|
KENNAMETAL M 750 - Medium Pitch 8" Diameter 30°/60° Face Mill $150.00 |
|
|
SANDVIK COROMANT 3" FACE MILL RA262.2-080A WITH A 3/4" PILOT LOT A498 $19.00 |
|
|
14 CORUN S-MAX FaceMill Cutter Wedges(#265.2-825)w/scr. $19.00 |
|
|
Sumitomo UFO Series 406L Face Mill New Never Used $135.00 |
|
|
VALENITE-D-06.86 5 IN Face Mill Cutting Tool w/inserts $66.00 |
|
|
SANDVIK Coromant RA265.2-80E Face Mill Cutting Tool $55.00 |
|
|
NEW FACE MILL ADAPTER R8 32S $32.90 |
|
|
FETTE 2" TWINCUT 45DEGREE FACE/END MILL W/INSERTS W531 $99.99 |
|
|
FACE MILL CUTTER 4 FLUTE 2 X 3/4" MADE IN USA $224.27 |
|
|
SANDVIK CAPTO RA300 052C5 13M FACE MILL 4 FLUTE MILLING $199.99 |
|
|
STANDARD 50 TAPER, FACE MILL HOLDER $25.00 |
|
|
CAT40 CNC TOOLING 1" END/FACE MILL HOLDER X625 $59.99 |
|
|
HERTEL 7666CL7 4x1-1/4" Bore Die & Mold Face Mill H36 $229.95 |
|
|
FACE MILL CUTTERS (10) $495.00 |
|
|
New In Case Kennametal 45° Face/End Mill Mfr#1817941 $159.99 |
|
|
Parlec Cat 50 Facemill Adapter 1.250" $49.00 |
|
|
SHARS-1-1/2" 90º INDEXABLE FACE SHELL MILL CUTTER TPGN INSERT NEW $56.50 |
|
|
.910" END/FACE MILL CARBIDE INSERTS A295 $89.00 |
|
|
NEW 5" ISCAR 45-DEGREE INDEXABLE FACE MILL & CAT 50 $399.99 |
|
|
ISCAR F90LN D3.00-10-1.00-R-N11 90DEG FACE MILL $450.00 |
Comments are closed for this entry.